Charvel: Difference between revisions
From Allan Holdsworth Information Center
| Line 36: | Line 36: | ||
Holdsworth’s current lead work is especially unusual because although his tone is as fluid and nimble as a synthesizer, he uses virtually no signal processing at all (he did use a Scholz Rockman for the sax-like bite of "Three Sheets To The Wind"). "I’ve noticed for a long time that lighter bodied guitars always seemed to sound better. ['''Charvel'''’s] '''Grover''' '''Jackson''' was unbelievable, going to all lengths experimenting with different woods. We finished up using bass wood; it’s a little bit like alder, but it’s lighter, very resonant. '''Grover''' made four '''Charvel''' guitars for me. He also widened the neck dimensions, more like a Gibson. The bridge is an aluminium DiMarzio and the pickups are Seymour Duncans, similar to a PAF but with two rows of pole pieces so that both bobbins are absolutely symmetrical; it makes the magnetic field more uniform." For strings, Allan uses .009 Kaman Performers. His favorite amp for lead playing has been a Hartley-Thompson with an occasional Fender. | Holdsworth’s current lead work is especially unusual because although his tone is as fluid and nimble as a synthesizer, he uses virtually no signal processing at all (he did use a Scholz Rockman for the sax-like bite of "Three Sheets To The Wind"). "I’ve noticed for a long time that lighter bodied guitars always seemed to sound better. ['''Charvel'''’s] '''Grover''' '''Jackson''' was unbelievable, going to all lengths experimenting with different woods. We finished up using bass wood; it’s a little bit like alder, but it’s lighter, very resonant. '''Grover''' made four '''Charvel''' guitars for me. He also widened the neck dimensions, more like a Gibson. The bridge is an aluminium DiMarzio and the pickups are Seymour Duncans, similar to a PAF but with two rows of pole pieces so that both bobbins are absolutely symmetrical; it makes the magnetic field more uniform." For strings, Allan uses .009 Kaman Performers. His favorite amp for lead playing has been a Hartley-Thompson with an occasional Fender. | ||
==[[Reaching For The Uncommon Chord]]== | |||
'''CHARVEL STRAT | |||
''' | |||
I met Grover Jackson in England. He was given my phone number by Steve Blucher, a friend of mine at DiMarzio. Grover and I met at a pub, and we started talking to each other about guitars, and I told him about how I felt about light wood and how I had found that really light wood worked great for me. I also told him my thoughts on neck dimensions - 11/16" to 214" (I think all Charvel necks are like that now). He told me that when I came over to the States, he was going to make me a guitar. When we came to California, I didn’t have a guitar (I had a guitar, but it was just a cricket bat). Then Grover made me two really fantastic ones - the one I preferred was made from basswood. But basswood varies in weight. Up to a point, the lighter the wood, the better the guitar sounded; but if they were too light, the sound regressed. He used the new neck dimensions - the top is actually a Fender measurement, and the bottom is a Gibson measurement. We used Gibson string spacing and Seymour Duncan pickups. Seymour Duncan worked with me on numerous custom wound pickups. I played the Charvel for about two years. | |||
==[[Allan Holdsworth (Guitarist 1985)]]== | ==[[Allan Holdsworth (Guitarist 1985)]]== | ||
