Gibson: Difference between revisions

Holdsworth’s current lead work is especially unusual because although his tone is as fluid and nimble as a synthesizer, he uses virtually no signal processing at all (he did use a Scholz Rockman for the sax-like bite of "Three Sheets To The Wind"). "I’ve noticed for a long time that lighter bodied guitars always seemed to sound better. [Charvel’s] Grover Jackson was unbelievable, going to all lengths experimenting with different woods. We finished up using bass wood; it’s a little bit like alder, but it’s lighter, very resonant. Grover made four Charvel guitars for me. He also widened the neck dimensions, more like a '''Gibson'''. The bridge is an aluminium DiMarzio and the pickups are Seymour Duncans, similar to a PAF but with two rows of pole pieces so that both bobbins are absolutely symmetrical; it makes the magnetic field more uniform." For strings, Allan uses .009 Kaman Performers. His favorite amp for lead playing has been a Hartley-Thompson with an occasional Fender.

==[[Castles Made Of Sand (Guitarist 1987)]]==

A lot of my playing is based on chord voicings which are very keyboard-like, and so a keyboard type of sound is better suited to my style than a distorted lead ‘guitar’ sound. '''Gibson'''s may suit a lot of people, but really if I got given one then its only function or use to me would be wallpaper - I’d just hang it on the wall to look at!’

“I love the Steinberger design, but ever since they merged with '''Gibson''', I’ve had trouble communicating with them. Fortunately I met this guy named Bill DeLap who made me two Steinberger-styled guitars that use their hardware, but have wood bodies instead of plastic. We took the best things of a Steinberger and just tried to get more out of that design. They’re full-sized instruments – 25 – ½” – and like a violin, have a maple neck, ebony fingerboard, spruce top and a maple back. Bill also made me some baritone ones that are just really long-scaled guitars – there are 34”, 36”, 38” scale versions. I didn’t use them on the new album, but I did on my last one, Wardenclyffe Tower. I played the 34” on “Zarabeth” and the 38” on “Sphere of Innocence”. And now he’s making me a piccolo guitar. But they all work like a regular guitar with regular strings, partially because the Steinberger bridge system doesn’t need a lot of winds to get in tune. I use LaBella strings – the company has been really amazing to me, too, and helped out whenever they could. My action is pretty low, and I don’t use the tremolo bar much anymore, either. About five years ago when all the heavy metal guys were using them, I sort of stopped, because it started looking like a new toy that everybody got. It was like when the wah-wah and the fuzz box came out and all of a sudden you heard them on every record. So I basically stopped using it.

Yeah, they’re usually 11/16ths at the nut to 2 1/4 at the bottom of the neck, pretty much like the Charvel necks that Grover Jackson made for me back in the ’80s, which is not standard at all on a Strat, because Strat necks are really narrow at the top, and the string spacing is really wide, so my problem with Strats was first of all I didn’t like the radius. And then the second thing is that the necks are so narrow at the top, compared to wherever the string spacing is at the bottom, that I would roll the strings off of it on each side of the fretboard. So I just decided to ask Grover, originally, if he’d make a nice wide at the nut neck. But then make it as wide as a '''Gibson''' Les Paul at the end of the fretboard. And of course then you look at a '''Gibson''', and the spacing’s down on the bridge end of the fretboard, but the neck is wider. So it seemed completely illogical to me that the Fender neck is really not quite right somehow. It’s just personal taste, that’s all. So I’ve had all my guitars made with pretty much those dimensions. And with just about as big a frets as you can get, and then a pretty flat radius: 20 to 25.