Charvel: Difference between revisions
From Allan Holdsworth Information Center
No edit summary |
|||
| Line 101: | Line 101: | ||
Yeah, they’re usually 11/16ths at the nut to 2 1/4 at the bottom of the neck, pretty much like the '''Charvel''' necks that '''Grover''' '''Jackson''' made for me back in the ’80s, which is not standard at all on a Strat, because Strat necks are really narrow at the top, and the string spacing is really wide, so my problem with Strats was first of all I didn’t like the radius. And then the second thing is that the necks are so narrow at the top, compared to wherever the string spacing is at the bottom, that I would roll the strings off of it on each side of the fretboard. So I just decided to ask '''Grover''', originally, if he’d make a nice wide at the nut neck. But then make it as wide as a Gibson Les Paul at the end of the fretboard. And of course then you look at a Gibson, and the spacing’s down on the bridge end of the fretboard, but the neck is wider. So it seemed completely illogical to me that the Fender neck is really not quite right somehow. It’s just personal taste, that’s all. So I’ve had all my guitars made with pretty much those dimensions. And with just about as big a frets as you can get, and then a pretty flat radius: 20 to 25. | Yeah, they’re usually 11/16ths at the nut to 2 1/4 at the bottom of the neck, pretty much like the '''Charvel''' necks that '''Grover''' '''Jackson''' made for me back in the ’80s, which is not standard at all on a Strat, because Strat necks are really narrow at the top, and the string spacing is really wide, so my problem with Strats was first of all I didn’t like the radius. And then the second thing is that the necks are so narrow at the top, compared to wherever the string spacing is at the bottom, that I would roll the strings off of it on each side of the fretboard. So I just decided to ask '''Grover''', originally, if he’d make a nice wide at the nut neck. But then make it as wide as a Gibson Les Paul at the end of the fretboard. And of course then you look at a Gibson, and the spacing’s down on the bridge end of the fretboard, but the neck is wider. So it seemed completely illogical to me that the Fender neck is really not quite right somehow. It’s just personal taste, that’s all. So I’ve had all my guitars made with pretty much those dimensions. And with just about as big a frets as you can get, and then a pretty flat radius: 20 to 25. | ||
==[[Interview with Allan Holdsworth (Jazz Italia 2005)]]== | |||
ALEX: Could you describe the qualities of your guitars starting with the legendary Charvel, right up to the current Carvin? | |||
ALLAN: Actually, before using the first Charvel, I bought a Fender Stratocaster during the time I was working with Tony Williams. I used a white Gibson SG Custom. It really was a great guitar! I lost it ... but I bought a Stratocaster that I used for a while with a single coil but I did not like it very much, so I redid the wiring so that the tone knob worked on the treble pickup. I connected the tone knob to the rear pickup so that it sounded a bit thicker ... then I played ... hell, I did not like it at all so I took some humbucking pickups and put them in. Since I had PAFs from SG - I owned 3 or 4 SGs - from which I always eliminated the middle pickup, I used 2 on this guitar and it sounded very good. It was a light body, as if it were alder... ... [Machine back translated.] | |||
ALEX: Do you prefer alder or ash? | |||
ALLAN: I do not like ash. It's too hard. In my opinion, alder sounds much better. Then I realized that I did not really like the neck because it had Fender spacing. I needed the Gibson spacing and I wanted the neck to be wider ... On the Fender with the double strings [“Sulle Fender con le corde più doppie”] and the narrower neck I had the neck really bent and the strings tended to come out from both sides. So, I went to a luthier and I had a neck built, a maple neck with an inch and 11 / 16th up to 2 and ¼ ... it was practically the size of a Gibson neck ... then I got built a vibrato with Gibson spacing, and it was excellent. It sounded really good. A fantastic guitar. I used it on everything I did in England. With that guitar I made the album IOU. We had to mix the album and we did not have a penny. We had a deadline so I mixed side 1 in a day from midnight to 7 am and the next day still from midnight to 7 I mixed side 2! But I had to sell the guitar to pay for the recording so ... I did not have a guitar! When I moved to America, I contacted Grover Jackson who was the Charvel guy. He is a fantastic person. He built me 5 or 6 guitars, we talked about the type of wood to use and he took the size of the neck from inch and 11 / 16th to 2 and ¼ making it standard so that after making those guitars for me, the Charvel people liked it so much that they started doing all the Charvels with that dimension. They no longer made a guitar with the regular size neck! Jackson also introduced me to the American basswood which may be lighter than the alder. I had two or three made of this wood, a red one ... it was beautiful. I never wanted to sell it! [Machine back translated.] | |||
[[Category:Guitars]] | [[Category:Guitars]] | ||
